How do I hire a top-billing recruiter for a non-tech desk in Australia?

Hire a top-billing recruiter for a non-tech desk in Australia: match temp, contract or perm billings to how the desk earns and check what stays behind.
The short answer
To hire a top-billing recruiter for a non-tech desk in Australia, such as industrial, accounting or healthcare, start with how the desk earns: temp margin, contract or perm fees. Check the billing record against that model and ask what stays behind at the old agency. Managed Growth Partners (MGP) headhunts proven, currently-billing recruiters for agencies.

TL;DR

  • Match the biller to how the desk earns. Perm fees arrive in lumps; temp margin builds week by week.
  • On a temp desk, read margin, not revenue. Ask how long the book took to build.
  • Plan to build, not transfer. Temps on assignment and client contracts stay behind.
  • Check the contract and the licence first. As of 17 November 2026, restraint reform is a draft, not law.

Decision matrix: which biller fits which non-tech desk

A temp or contract biller with a running book (for example industrial or healthcare temp)

  • Best when: the agency already has payroll, compliance and any licence needed, so supply can start early.
  • Watch out for: the book stays behind, margin resting on one or two clients and restraint terms.
  • Cost or effort: a slower start while a new book builds.

A specialist perm biller (for example accounting and finance perm)

  • Best when: wins come from market knowledge and candidate relationships that travel with the person.
  • Watch out for: lumpy months that look weak in a short window, and client non-solicitation terms.
  • Cost or effort: a wait before the first invoice; judge a full year, not a quarter.

A 360 biller, who both wins clients and fills roles (for example a regional general desk)

  • Best when: one person must cover perm and temp.
  • Watch out for: totals that hide which billings came from which model.
  • Cost or effort: more management time to set targets for two models.

A proven biller switching sectors (for example accounting perm to healthcare)

  • Best when: the desk model stays the same and the agency gives market support.
  • Watch out for: contacts don’t move, and changing model as well as sector doubles the risk.
  • Cost or effort: the longest ramp of the four.

The case for hiring the person, not the desk type: Some billers win on habits that work on any desk: steady business development, honest candidate care and quick follow-up. If those habits are proven and the agency can supply the market knowledge, filtering hard on desk model can rule out the best person available.

Verdict: Hire the biller whose record matches how the desk earns, judging temp desks on margin and perm desks on a full year of fees. Assume the temps and clients stay behind, and check restraint terms and licensing before any offer. Where the habits are proven and the agency can cover the market knowledge, a biller from another desk type or sector can still be the right hire.

Start with how the desk earns

A non-tech desk earns in one of three ways, and a biller’s record makes sense only against the right one. Perm desks earn one-off placement fees. Temp and contract desks earn margin on hours worked on assignment, so value builds as a running book. A 360 desk does both.

An industrial temp desk may show steady weekly margin from workers placed months ago, while an accounting perm desk can have a quiet quarter and then three fees in a month. In August 2025 there were 2.4 million casual employees in Australia, or 19% of all employees, according to the Australian Bureau of Statistics (ABS) working arrangements data. That covers all employees, not agency temps.

Reading billings on temp, contract and perm desks

Ask for the numbers the desk model runs on, then test them against references. Managed Growth Partners (MGP) runs Rec2Rec (recruitment to recruitment) headhunting for agencies, and we verify a candidate’s billing claims before we send their CV.

  • Temp or contract: weekly margin rather than gross billings, how many workers are out now, how long the book took to build and how many clients it rests on.
  • Perm: fees across a full year rather than a quarter, and repeat clients.
  • Any desk: what was personal rather than shared with a team, what was collected as well as invoiced and clients they won rather than took over.
  • References: a former manager, with the candidate’s consent.

Don’t ask for client lists, worker lists or margins by client from a current employer. The Office of the Australian Information Commissioner (OAIC) sets out the privacy rules for job applicants: the Privacy Act’s employee records exemption doesn’t apply to people who apply and aren’t hired.

What moves with a biller and what stays

A biller takes their skills, habits, market knowledge and the candidate relationships they built. The temps on assignment, the client contracts and the old agency’s data belong to the old agency and stay behind. So plan to build a book, not transfer one.

Treasury lists the types of restraint clauses a contract can hold, and several can apply together:

  • Client non-solicitation: limits a worker asking their employer’s clients to take their business elsewhere.
  • Co-worker non-solicitation: limits a worker inviting colleagues to join another business.

As of 17 November 2026, restraint reform isn’t law. Treasury released an exposure draft Bill in September 2026. It would ban non-compete clauses for employees earning equal to or less than the Fair Work high income threshold, and co-worker non-solicitation clauses for all employees at any income. Consultation closed on 2 October 2026, and a ban needs Parliament to pass a law before it applies, but when we checked on 17 November 2026 we could not find a matching Bill on the Parliament of Australia Bills Search or the Bills before Parliament list.

Treasury’s explanatory materials for the draft say “co-worker” means “any person who currently or has previously carried out work in any capacity for the employee’s employer”. They don’t say how that applies to an agency’s own temps, so have the contract checked by an employment lawyer.

The draft would also make it cartel conduct, with civil and criminal penalties, for agencies to agree to stay away from each other’s staff, whether by recruiting, soliciting or hiring them. A single agency choosing by itself to avoid a rival’s staff wouldn’t be caught.

This is general information, not legal advice.

Can a temp biller rebuild a book at a new agency?

Yes, if the new agency gives them something to build with:

  • workers ready to go out on assignment, and the means to employ and pay them
  • payroll, insurance and compliance
  • standing with clients who will take temps from a new supplier
  • a labour hire licence, where the state requires one

Victoria requires labour hire providers to hold a licence, and hosts must only use licensed providers, under Victoria’s labour hire licensing rules. Most applicants receive a decision within 60 days, and the requirements changed in 2026. An agency planning an industrial temp desk in Melbourne should check its licence position before the biller starts.

Queensland also requires all labour hire providers to be licensed, and users can only use a licensed provider. Queensland’s licensing guidance draws a clear line between the two desk models: “Recruitment and permanent placement services … are not considered labour hire services”.

Check the rules in each state or territory where the desk will supply workers. This is general information, not legal advice.

Where proven billers outside tech are found

Settled billers are busy billing and don’t browse job ads. They are reached through referrals, a direct approach from a leader who knows them or a Rec2Rec that contacts billers who aren’t job hunting. In a regional healthcare market where everyone knows everyone, a leader’s own call to a temp biller isn’t anonymous.

A dedicated go-to-market (GTM) engineer on our team finds the best billers in Australia, the UK and the US, drawing on multiple data sources and signals. When we first approach a biller, we keep the hiring agency’s name confidential. Our homepage sums up the style: “Phone-first outreach, no LinkedIn blasts or job adverts”.

We headhunt billers for non-tech agency desks, such as industrial, accounting or healthcare. Our homepage sets the working rule: “One niche per consultant.”

Once a biller joins, the early months matter, so read how to help a new hire stay.

Is a Rec2Rec fee worth it for a non-tech desk?

It’s worth it when the biller the agency wants is settled elsewhere and can’t be called without word getting out. It isn’t when a leader already knows the biller and the biller is keen to move.

A temp desk changes the sums. The fee buys the biller, not their old book, and a new book can take months to build, so weigh the fee against how long the agency can carry a slower start. For how placement fees are structured, see Rec2Rec fees in Australia.

A strong biller who joins will soon hear from other agencies too, so plan for what keeps billers when rivals call.

How MGP can help

MGP headhunts proven, currently-billing recruiters for recruitment agencies, and recruiters looking for a role never pay us. Agencies are covered by a six-month like-for-like replacement guarantee that runs from the hire’s start date, provided the client pays on time (it doesn’t cover redundancy or restructure). Book a call and tell us how the desk earns.

Frequently asked questions

How are billings on a temp desk different from a perm desk?

A perm desk earns a one-off fee for each placement, so billings tend to arrive in lumps. A temp or contract desk earns margin on the hours people work while on assignment, so its value is a running book that grows over time. Judge a biller against the model of the desk being filled, not a single total.

Does a temp biller’s book move with them to a new agency?

Not automatically, because the temps on assignment and the client contracts belong to the old agency, and the biller’s contract may limit approaching its clients or staff. As of 17 November 2026, restraint reform is a draft Bill, not law. This is general information, not legal advice.

Can a recruiter switch from one non-tech sector to another and keep billing?

Sometimes, because habits such as business development and candidate care travel with the person, while contacts and market knowledge don’t. Expect a slower start in the new sector, and check whether the desk model is changing too, for example from accounting perm to healthcare temp, because that adds a second thing to learn.

Does an agency need a labour hire licence to start a temp desk?

In some states, yes: in Victoria and Queensland, labour hire providers must hold a licence and hosts must use licensed providers, while Queensland says permanent placement isn’t labour hire. Check the rules in each state or territory where the desk will supply workers. This is general information, not legal advice.

Does MGP help agencies hire billers outside tech?

Yes. MGP headhunts proven, currently-billing recruiters for agencies on desks outside tech, such as industrial, accounting or healthcare, and each consultant works one niche. We keep the hiring agency’s name confidential on first approach and verify billing claims before we send a CV, and recruiters looking for a role never pay MGP.

Sources

  1. Australian Bureau of Statistics, Working arrangements, August 2025 (released 12 December 2025), https://www.abs.gov.au/statistics/labour/earnings-and-working-conditions/working-arrangements/latest-release (accessed 1 November 2026).
  2. Office of the Australian Information Commissioner, Employee records exemption, https://www.oaic.gov.au/privacy/privacy-guidance-for-organisations-and-government-agencies/organisations/employee-records-exemption (accessed 1 November 2026).
  3. Treasury, Non-compete clauses and other restraints (last updated 7 October 2025), https://treasury.gov.au/review/competition-review-2023/non-compete-clauses (accessed 1 November 2026).
  4. Treasury, Competition and Fair Work Legislation Amendment (Banning Unfair Non-Competes) Bill 2026, Exposure Draft Explanatory Materials (2026), https://storage.googleapis.com/files-au-treasury/treasury/p/prj3f00a298602dd09b72b97/page/fil3f010d335755068aab08b_c2026_801178_em.pdf (accessed 1 November 2026).
  5. Labour Hire Authority (Victoria), Apply for a labour hire licence, https://www.labourhireauthority.vic.gov.au/provider/apply-for-a-labour-hire-licence/ (accessed 1 November 2026).
  6. Labour Hire Licensing Queensland, Licensing, https://www.labourhire.qld.gov.au/licensing (accessed 1 November 2026).

More from the desk

All notes

Tell us what you're trying to grow

A straight conversation about where the agency is now and what's actually in the way. No pitch deck, no pressure.